Thursday, April 23, 2015

Los Reyes Gets 'What Fer': Part I

The first strokes of paint were applied to Los Reyes over 15 years ago back when I lived in Texas.  I added a carved frame to the piece somewhere around 2005.  Both the canvas and the carved frame were interesting pieces, but they didn't interact with each other as well as they could have.

The time has come to remedy that.

First thing to do is to address the canvas by adding some relief figures to the composition.

Once those are in place and primed, it's time to add the first layer of color.

I'm also going to need a lot of arrows.

Now it's time to add some line work.

EENNNNNNNNNNNNNNNNNNNNTTTTT!!!!  Scratch that.  As I am working on this, it has become obvious that Los Reyes needs something more thorough/drastic to make it 'work'.  Time to get out the saw.......

No, really, it's time to get out the saw......

After a little cutting and a quick canvas-endectomy, Los Reyes is ready to begin a new journey.

Get down a proper base color.......

.....and lay down some lines......

.....and some colors.......

Haze and repeat the process for the second layer.

Time to add color to the second layer of imagery.

I had to go back and add some lines around the Xs.

Los Reyes will have at least three layers of imagery before it's done (at the moment, it only has two).  But for now, on to the frame.....

I want the carved frame to have some ties to the second layer of imagery/colors, so I utilize some of those colors to paint the frame.  A larger percentage of the colors on the frame will come from the top layer of the canvas, with some colors only appearing on the frame.  That's the plan for today anyway.  The plan is always subject to change.

Time to haze over the painting and make some sketches for the third layer.

No comments:

Post a Comment